Description:
This document is to help in verifying basic configuration of the gateway settings to allow communication to the core, patching servers, and licensing server.
Configure Date and Time first.
Steps:
1. Click on System > Network Settings
2. Remove any references to the 192.168.0.1 and 192.168.0.2
3. Set IP, subnet, and gateway for your network on eth0.
4. Click add
5. Set the hostname and dns suffix for your device
6. Click save
7. Click on the hostnames tab.
8. Remove any references to the 192.168.0.1 and 192.168.0.2
9. We will want to add the core here.
10. Core IP, Core FQDN, Core Hostname click add
11. Ping license.landesk.com, patchec.landesk.com and patch.landesk.com to obtain the IP addresses.
12. Enter the IP, license.landesk.com, license.landesk.com click add
13. Enter patch IP, patch.landesk.com, patch.landesk.com click add.
14. Click save
15. Click on the security section.
16. Remove any subnets you use from the blocked list.
17. Add the core IP to trusted
18. Add the patch.landesk.com, patchec.landesk.com and license.landesk.com IP's in the trusted
19. Click save at the bottom
20. Click on the users section. Make sure you know the service account password; we will need this to configure the core. It will only be used on the core in one location(Manage Gateway/Manage Cloud Service Appliances), so if you don't know it go ahead and reset it so you can have the correct password
21. Click on the Gateway Service Section. In the additional Hostnames section you will want anything the gateway can resolve to or from, FQDN, internal and external IP, Etc
22. Click Save
23. Install Patches.
A) For the 4.2 CSA - When applying patches Install the GSB Patches in numerical order, then the EECert patch, next install the Broker patches in numerical order, last install the remaining patches from the top down.
B) For the 4.3 CSA - Install patches in numerical order.